Industrial Board

PoE-9210
Features:
◎ Intel® Ethernet Controller i210-AT
◎ PCI Express® Mini Card Specification Revision 1.2 compliant
◎ Two port Power Sourcing Equipment(PSE) supports up to 48V, 25.5 Watts max. output per port
◎ Support AT and AF mode IEEE 802.3 AF : Support 15.4W/port , 4 port up to 60W
◎ IEEE 802.3 AT : Support 25.5W/port , 4 port up to 100W
◎ Powered Device (PD) auto detection and classification
The PoE-9210 2-Port PoE NIC lets you add four Gigabit Power over Ethernet ports through a Mini PCI Express slot. Each port can provide up to 25.5W of power, combining network data and power over a single Ethernet cable for reduced cable clutter and added convenience for remote PoE devices.The PoE-9210 card supports the IEEE 802.3at standard for Power Sourcing Equipment (PSE), and can deliver up to 48V DC power to compliant Powered Devices (PD). This eliminates the need for a separate power source and data connection for PoE devices such as IP cameras, IP phones or wireless access points. PoE-9210’s flexible design – Mini PCIe module / Power Module / Connector board provide customers to customize their features.
Chipset |
|
Intel I210 Gigabit Controller |
|
Bus Interface |
|
PCI Express Mini Card Revision 1.2 |
|
Whole Duplex |
|
Compatible Whole Duplex and Half Duplex |
|
Network Interface Type |
|
RJ-45 Copper *2 |
|
Transmission Speed |
|
10/100/1000Mbps |
|
Power Requirement |
|
12V~36V power input via 4pin STD ATX power connector |
|
Compatibility |
|
Complies with IEEE 802.3at, up to 25.5W at 57V per PoE port Complies with IEEE 802.3af, up to 15.4W at 48V per PoE port |
|
Output PoE Power |
|
Supplies total power up to 100W |
|
Compatible Operating System |
|
Windows 7、Windows 8.1、Windows 10 |
|
Windows Server 2008 (R2)、Windows Server 2012 (R2)、Windows Server 2016 |
|||
Working Temperature |
|
0°C-70°C |
Ordering Information:
PoE-9210 |
|
Dual Port PoE Module PCIex4 Gen 2 Intel I210AT Controller compliant with IEEE802.3AT/AF PoE standard, Input voltage range 12V DC to 36V DC |
|||
Select output voltage for PD power supply 48/50/54/57V |
|||||
w/ PSE2LAN module + PSE100W module |
|||||
With 25cm cable |